SELECT LIST OF OTHER PROJECTS

 

United States
 

Alabama

 

Blount Constructors, Montgomery, AL

Engineering and construction technical support and an independent review and inspection of the design, equipment, and construction for five 30 MW power block facilities producing electricity from hot oil with natural gas standby.

 

California

 

AES, Huntington Beach, CA

Redesigned and replaced two super-critical steam generators and rebuilt two 225-megawatt cross-compound high pressure turbine generator units. Designed and integrated state-of-the-art NOx and CO emission systems.

 

City of Long Beach, Long Beach, CA

Engineering, procurement, construction management, permitting and testing for a municipal waste-to-energy facility, including Thermal DeNOx System.

 

Carver Greenfield, Carson, CA

DeNOx Reduction for three circulating fluidized bed systems utilizing hydrogen, ammonia and compressed air systems.

 

Harper Lake Power, Harper Lake, CA
Engineering and construction, independent design review, equipment selection, and construction for two 80 MW power block facilities producing electricity from hot oil with natural gas.

 

PERG Landfill Gas to Energy, Los Angeles, CA

Engineering, procurement, construction management, start-up and emissions optimization for the 50MW Puente Hills Landfill Gas Power Project.

 

Central CA Irrigation District, Ceres, CA

Design and engineering of the combustion turbine and waste heat boiler systems for a 50 MW Combustion Turbine Facility.

 

Northern California Power Authority, Lodi, CA

Design and engineering of the combustion turbine and waste heat boiler systems for a 50 MW Combustion Turbine Facility.

 

Mission Energy, Irvine, CA

Plant modification to a 75MW geothermal facility to provide design modification to improve plant efficiency.

 

United States Navy, Miramar, CA

Steam plant modification to Miramar station central steam plant, including permits, design, engineering and procurement activities.

 

Kale Kan, Vernon, CA

Engineering, procurement, construction, and start-up for Central Steam Plant consisting of boiler, auxiliaries, duct burner, and SCR Reduction System.

 

United States Navy, El Toro, CA
Electrical high voltage engineering and design for the power distribution system for the entire naval base facility.

 

UCI Medical Center, Orange, CA

Engineering, permitting, and testing of low NOx high performance water wall boiler. 5ppm NOx (3% O2), 4ppm CO (13% O2).

 

SCE SCR Project, Oxnard, CA
Engineering, design, equipment and construction to support a 480 MW facility retrofit with a SCR emissions reductions system.

 

LUZ Engineering, Corp., Boron, CA
Installation of gas burner modifications for SEGS Units III V totaling 90 MW. Design and modifications reducing the emissions to approximately 85 PPM to the mid 50's without flue gas recirculation.

Colmac Energy, Mecca, CA
Design, furnish, and start-up a Thermal DeNOx System for two 220,000 lb/hr waste circulation fluidized bed systems.

Poso Project, Bakersfield, CA
Design, furnish, and start-up of a Thermal DeNOx System with compressed air system for a 290,000 lb/hr coal fired power plant.

Jasmin Facility, Kern County, CA
Design, furnish, and start-up a Thermal DeNOx System with compressed air system for a 290,000 lb/hr coal fired power facility.

Los Angeles DWP, Los Angeles, CA
Engineering, procurement, and construction management of retrofit Thermal DeNOx installation on 230 MW facility in Long Beach, CA. Turnkey installation, including one year optimization testing.

 

LUZ Engineering, Boron, CA

Gas burner modifications for SEGS 30 MW Unit No.2 to burn oil at 310,000 lb/hr along with improving performance on three additional 30 MW units. Plant modification for 15 MW facility with 1,000,000 gallons of fuel storage and handling.

 

City of Rolling Hills, Rolling Hills Estates, CA

Palos Verdes 15 MW power project to provide engineering and construction, technical assistance, and independent review of design, equipment, and construction.

 

Queen of Angeles Hospital, Los Angeles, CA

Design and integrate Low NOx burner systems controls system and recirculation fans. Designed to lower NOx emissions to 9 ppm.

 

California Steel, Fontana, CA
Installation of seven boilers firing natural gas for steam production and distribution. Engineering, procurement, and construction management.

 

Applied Energy Services, Placerita, CA
Engineering to review plant performance, components, and prepare heat balance on a 100 MW combined cycle installation.

 

SCE SCR Project, Redondo, CA
Engineering, design, equipment and construction support of a 480 MW retrofit for a SCR emissions reduction system.

 

PG&E Morro Bay, CA

Engineering and equipment in support of a 360 MW emissions reductions retrofit using urea.

 

Stanislaus Waste-to-Energy, Stanislaus, CA
Engineering and evaluation of a waste-to-energy facility, recommendation of a Thermal DeNOx System, and over plant air emissions testing.

Long Beach Waste-to-Energy, Long Beach, CA
Three 117,170 lb/hr units at 660 psi and 752°F for a waste-to-energy project, providing plant design improvements and betterment to plant operation.

Rocklin Biomass Project, Sacramento, CA
Design, furnish, and start-up a Thermal DeNOx System for a 220,000 lb/hr wood fired circulating fluidized bed systems.

Powerline Oil Co., Santa Fe Springs, CA
Plant modification and burner changes, including staged combustion/engineering, procurement, and construction management.

Coyote Canyon, Irvine, CA
Design and permitting for an operating NOx system for a 207,440 lb/hr boiler at 1360 psia and 955 degrees F with a compressed air system.

 

Miller Brewing Co., Irwindale, CA
Design and evaluation of several cogeneration applications ranging from 8 MW to 50 MW.

 

City of Irwindale, Irwindale, CA
Design and review of Thermal DeNOx System application for four units each at 200,000 lbs/hr utilizing municipal solid waste.

Del Marva Capital, Burney, CA
Consulting and plant review of 31 MW waste wood power plant and sawmill.

Colorado

Thermo Industries, Inc., Fort Lupton, CO
Engineering, design, equipment selection, specification, contractor’s selection, and construction supervision of a combined 280 MW power generation plant.

Monfort Cogeneration, Greeley, CO
Engineering, design, equipment selection, specification, contractor's election, and construction supervision of a 32 MW power generation project.

Public Service Company of Colorado, Denver, CO
Engineering and design for a NOx Reduction System with a compressed air system for a 100 MW power station.

 

Connecticut

 

Fresno Biomass Energy Project, Windsor, CT

Design, furnish, and start-up of a Thermal DeNOx System for a 220,000 lb/hr biomass fueled circulating fluidized bed system.

 

Kansas

 

Westar Energy, St. Mary's, KS
Implement Flue Gas Desulfurization (FGD) systems on three 800 MW CE units at Westar's Jeffrey Energy Center.

 

Maryland

 

Combined Cycle Power Plant, Frederick, MD
Engineering, design, equipment selection, specification, contractor's selection, and construction supervision of a combined 450 MW power generation plant.

Procter & Gamble, Baltimore, MD
Design, procurement, construction management, and start-up of a thermal fluid heating system and 3 boiler systems at Glycerine Refinery. 

 

Del Marva Capital, Baltimore, MD
Third party review of engineering and equipment for Glendon Resource Recovery Plant.

Minnesota

Minnesota

Hennepin Waste-to-Energy, Minneapolis, MN
Design, furnish and start-up a Thermal DeNOx System for two 300,000 lb/hr projects each firing 606 tons/day of municipal solid waste.

 

Nevada

 

Department of Energy, Las Vegas, NV

Engineering to provide analysis of potential cogeneration processes for north Las Vegas facility expansion. Developed the cogeneration technology options using combustion turbines with heat recovery and gas fired internal combustion engine with waste heat recovery.

 

New Jersey

 

Passaic County Resource, Recovery Facility, Passaic, NJ
Three 478 tons per day units for waste-to-energy facility. Engineering, procurement, construction management, permitting and testing for Thermal DeNOx System.

New York

EFW Occidental Chemical Co., Niagara Falls NY
Design, operational review, and engineering services for 2,000 ton-per-day cogeneration facility.

Ohio

Dayton Power & Light, Aberdeen, OH
Plant and boiler overhead and FGD balanced draft conversion for four 650 MW coal-fired electric generating power plants from 2004 through 2007.

 

Oregon

 

Fluidized Bed Energy Project, Goose Lake, OR
Engineer, design, procure, fabricate, construct, start-up and test a high temperature air combustion turbine cycle with high temperature convention exchangers. Design and fabricate a fluidized bed boiler with air pollution control systems.

 

Pennsylvania

 

Duquesne Light, Cheswick, PA

570 MW power plant boiler modifications, including start-up and training.

 

Archibald Cogeneration Project, PA
Consulting services and third party review of activities for the Archibald Cogeneration Project.

 

South Carolina

 

Central Power Plant, Charleston, SC

Engineering, design, equipment selection, specification, contractor's selection, construction and supervision of a combined 450 MW power generation plant.

 

Texas

 

Austin Power Plant, Austin, Texas
Development, design, equipment and construction estimate for 200 MW combustion turbine facility.

 

Projects

Landfill Gas Power Puente Hills,

California, USA

International 
 

Central America

 

Alborada Power Plant, Guatemala
Engineering, design, equipment selection, specification, construction and start-up of a combined 100 MW power generation plant with integrated chiller system.

LNG Liquefaction Plant, Central America
Engineering, design, and construction estimate for two LNG 65 million cubic feet per day liquefaction trains and an LNG storage facility along with a shipping dock, fire protection. and control system.

LNG Storage Facility, Central America
Engineering, design, and construction estimate for an LNG storage facility containing 200,000 barrels of LNG, a receiving dock, and a regasification system for gas distribution for a central generating power plant.

Empresa Electric, Guatemala
50 MW combustion turbine project design review, control systems, engineering, and design for boiler and waste water treatment control systems supply.

Abu Dhabi Electrical Authority, Abu Dhabi
Engineering, estimating, and balance of plant equipment pricing for two combustion turbines of a 40MW gas turbine power plant for the government of Abu Dhabi.

Montreal Generating Station, Quebec, Canada
Engineering and design, equipment selection, and specification of a repowering project to increase total generation from 300 MW to 800 MW.

Energen, London, England
Development, permitting, conceptual design, engineering and design evaluation of a 40 MW waste-to-energy facility (1500 ton per day).

Bisen Power Plant, Bursa, Turkey
Design and engineering of the combustion turbine and waste heat boiler systems of a 33 MW combustion turbine facility.

Guayana Project, Venezuela
Development, design, equipment and construction estimate for 300 MW combustion turbine heat recovery steam generator facility.

Dual Landfill Waste-to-Energy, Madrid, Spain

Permit, conceptual design, equipment selection, engineering and design activities, along with construction cost estimate, for a dual gas and waste-to-energy power project to generate 50 MW of electricity.